Bunker hill security dvr 8 cameras setup instructions

Add cameras to the XVR using its menu interface.Once you have the necessary hardware to create a local network for the security cameras and one of our DVRs to communicate to each other, connecting them together is a four step process: DVR recorder - that supports IP camera inputs over the network.IP cameras - compatible cameras purchased from CCTV Camera World.Windows PC - to configure the cameras on the network using our Windows based tools.

Router - to network the cameras and the DVR on the same local network.Here's what you will need to follow this guide: If after the following this guide you have further questions, feel free to contact technical support by submitting a trouble ticket. This guide is applicable to Security DVR we offer and may not apply to one you already have. Regardless of how you are deploying your PoE switch, the process is pretty easy as long as you have a basic understanding of computer networking principles and follow the guide below on how to enable IP channels on your DVR or XVR and the camera to the recorder. You can even setup a standalone security camera system by connecting the PoE switch directly in to the network port of the DVR. Since DVRs only have BNC ports built-in, a PoE switch is required to connect any PoE cameras over the network to the DVR.

All of our DVRs support IP cameras and PoE cameras that we offer.

If you have an existing camera system and have recently upgraded the DVR recorder by purchasing one from CCTV Camera World then you're in luck. Network security cameras are ubiquitous and sought after for any security camera system.

Bunker hill security dvr 8 cameras setup instructions